Winter Waterfall Necklace | beadsdirect.co.uk
0

Winter Waterfall Necklace

Products used in project:

Winter Waterfall Necklace

Items (11)
Qty
Price
X Nunn Design Antique Silver Curled Petal Bead Cap 8mm Pk2
F0773
1
Out of stock
Nunn Design Antique Silver Faceted Drop Bead/Charm 6x37mm Pk1
MB847
1
Out of stock
"X" Aquamarine Semi Precious Round Beads 8mm 15" Strand
EX4501
1
Out of stock
Rhodium Plated Steel Chain 2x3mm 1metre
CH237
1
Out of stock
Beadalon Silver Plated Crimp Beads 2mm #1 Pk100
FCR1
1
Out of stock
Silver Plated Iron Eyepins 50mm (2 inch) Pk100
F0051
1
Out of stock
Nunn Design Antique Silver Fern Connector 13x34mm Pk1
CR0105
1
Out of stock
Antique Silver Small Nugget Beads 4x6mm Pk10
MB784
2
Out of stock
X-Blue Apatite Semi Precious Round Beads 8mm 15" Strand
EX4478
1
Out of stock
X-Blue Apatite Semi Precious Round Beads 6mm Pk20
EX4473
1
Out of stock
Silver Plated Jump Rings 6mm 0.8mm Thick Pk50
F0720
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Winter Waterfall Necklace

Designed by: Joanne

Difficulty: Beginner

Rating:

Step 1

Begin by carefully snipping the heads off thirteen of the headpins and turn a loop at the end using your round nose pliers, creating 13 eye pins.

Step 2

Take 1 crimp, 1 6mm Blue Apatite and 1 crimp. Thread each bead onto a newly made eyepin and turn a loop at the end. Repeat 4 more times.

Step 3

Take 1 small nugget, 1 8mm Aquamarine and 1 small nugget. Thread each bead onto an eyepin pin and turn a loop at the end. Repeat 3 more times.

Step 4

Take 1 small nugget, 6mm Blue Apatite and 1 small nugget. Thread each bead onto an eyepin and turn a loop at the end. Repeat once more.

Step 5

Take 1 bead cap, 2 crimp beads and 1 6mm Apatite. Thread all onto an eyepin and turn a loop at the end. Repeat once more.

Step 6

Connect two jumprings together. Join these with a further jump ring to form a knot. Repeat to make one more.

Step 7

Cut 30cm of chain. Using a jump ring, attach one of the connectors made in step 3 to the end of the chain.

Step 8

Using a jump ring, attach all of the connectors together following the image of the finished piece.