Make a Vintage Vision Headband |

Vintage Vision headband

Products used in project:

Vintage Vision headband

Items (2)
X Supa Champagne Copper Beading Wire 0.5mm 25metres
Out of stock
Gold Colour Tiara Base 0.5x15cm Pk1
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Vintage Vision headband

Designed by: Laura

Difficulty: Expert


This design is now in our inspirations archive. As this design was created some time ago we sadly no longer stock all the products to create our design, but can still be useful for inspiration.

Step 1

Using the wire, wrap around headband three or four times. Ensure that the end is tucked in before doing so. This will prevent the wire from unravelling.

Step 2

Start with 1xTG90 . Thread wire through it's hole once and then wrap around the headband.

Step 3

Add a bead cap then a pearl bead and then another bead cap. Wrap wire around the headband.

Step 4

Add the charms, pearls, fimo roses and bead caps in any order you wish.

Step 5

Finish with 1x TG90.  Do this so your headband looks symmetrical.

Step 6

When you have almost finished loosely wrap around the headband three or four times. Thread wire back through the last three wraps a couple of times then pull tight. Cut and tuck in wire so no sharp edges are exposed.