Tutti Frutti Paris Bracelet
Products used in this project
Information about this project
Please Note: You will need a jumpring to attach your charm to the charm carrier, if you do not have any in your stach F0101 or CM34 (4mm) is the one you will need.
Cut yourprinted cotton and your polyester cord in half. Glue one end of the cotton into the charm carrier so it finishes in the middle of the charm carrier. Glue the polyester cord into the other side of the charm carrier. You may be able to feed the polyester cord through the centre of the cotton for a more secure fixing.
Glue the other end of the cotton into the oval part of the clasp (it has a rectangular hole). Glue the polyester cord into the hook part of the clasp (it has a round hole). Be generous with the glue to get a secure hold.
Once the glue is dry, open a jump ring and attach your charm.
What our Happy Customers Have To Say
"Excellent service and products. Took less than 24 hours from packaging to delivery!"
October 24th 2017
October 17th 2017
"It's so wonderful... I can't stop buying..."
October 15th 2017