0

Tutti Frutti Crystal Bracelet

Information about this project

Difficulty: Beginner

Rating:

Follow the step-by-steps to make this funky 'Tutti Frutti Crystal' bracelet, using polyerster and printed cotton cord with a Swarovski fancy stone charm.

Please Note: You will need a jumpring to attach your charm to the charm carrier, if you do not have any in your stach F0210 (4mm) is the one you will need.

Step 1

Cut your cotton and your polyester cord in half. Glue one end of the cotton into the charm carrier so it finishes in the middle of the charm carrier. Glue the polyester cord into the other side of the charm carrier. You may be able to feed the polyester cord through the centre of the cotton for a more secure fixing.

Step 2

Glue the other end of the cotton into the oval part of the clasp (it has a rectangular hole). Glue the polyester cord into the hook part of the clasp (it has a round hole). Be generous with the glue to get a secure hold.

Step 3

Once the glue is dry, open a jump ring and attach your charm.