Swinging Hearts Earrings
Products used in this project
Not all products are available for this project
Information about this project
Difficulty: Intermediate
Please note you will need to manually enter multiples. For these earrings you need to ensure you have 2x AC793 in your basket.
You should have a total of 5 products in your basket. If there appears to be less than 5, one of the products may be out of stock. You can contact our customer service team and they will be more than happy to help find a suitable alternative.
Cut two10cm pieces of wire and bend them around a drinking glass.
Form a loop on one end of the wire using round nose pliers and cut off the excess. Measure 4cm in on the wire and bend it using a pencil or pen. Repeat with the other piece of the wire.
Slide the SWAROVSKI ELEMENTS Crazy 4U Heart into the wire. Cut off the excess wire after bending it to close the gap.
Attach the earwire to the loop using a 5mm jump ring. Repeat steps 3 and 4 to complete the other earring.
Step 1
Cut two 10cm pieces of wire and bend them around a drinking glass.
Step 2
Form a loop on one end of the wire using round nose pliers and cut off the excess. Measure 4cm in on the wire and bend it using a pencil or pen. Repeat with the other piece of the wire.
Step 3
Slide the SWAROVSKI ELEMENTS Crazy 4U Heart into the wire. Cut off the excess wire after bending it to close the gap.
Step 4
Attach the earwire to the loop using a 5mm jump ring. Repeat steps 3 and 4 to complete the other earring.
What our Happy Customers Have To Say
"Beads Direct is a wonderful supplier, the staff are fantastic, knowledgeable, friendly, super helpful and extremely efficient, reliable and honest."
Roz
October 9th 2019
"Just used my new kumihimo handle and weighted bobbins and they are great. My kumihimo has never been so neat and the thread/ weave so tight. It's great."
Rosie
September 25th 2019
"Fab company"
Sue M
August 13th 2019
