EXTRA 10% OFF ALL CLEARANCE LINES ENDS MIDNIGHT TONIGHT
Beads Direct - Beads for jewellery making, beads for craft and beadwork, semi-precious gemstones, glass beads, Swarovski Crystallized Elements, seed beads, silver beads, jewellery findings and more 0

Basket Summary

0

Sweetheart Bracelet

Sweetheart Bracelet

Sweetheart Bracelet

Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.

Step 1

Cut 5 strips of wire approx 10inches long. Thread 1 of the wires onto the first ring and crimp. Cover the crimp with a crimp cover.

Step 2

Thread on 20 of the EX3307 (Rhodonite Faceted Round Beads) and use a bead stopper to secure until later.

Step 3

Add a second wire to the second ring, crimp and cover the crimp as before. Add 8TR31F (Si/Lined Frosted Rosaline Seeds) until these beads match the length of your previously strung Rhodonite. Again, add a bead stopper until later.

Step 4

Add a third wire to the third ring, crimp and cover the crimp as before. Add EX3392 (Freshwater Potato Pearl) until these beads match the length of your previously strung Rhodonite. Again, add a bead stopper until later.

Step 5

Add a fourth wire to the fourth ring, crimp and cover the crimp as before. Add 8TR2114 (Silver-Lined Milky Nutmeg Seeds) until these beads match the length of your previously strung Rhodonite. Again, add a bead stopper until later.

Step 6

Add a fifth wire to the fifth ring, crimp and cover the crimp as before. Add EX3120 (Honey Quartz until these beads match the length of your previously strung Rhodonite. Again, add a bead stopper until later.

Step 7

Loosely plait, holding the Rhodonite and Frosted Rosaline as one, the pearls on their own and the Honey Quartz and Milky Nutmeg as one. Use crimps to attach each end to one of the loops on the other side of the clasp without opening it to ensure you get the position correct. Cover each crimp with a crimp cover.

Note: When laid flat, the bracelet will be measure approx 8 inches but because of the overlapping strands it will be approx 1 inch shorter.

Get Your Materials!

Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home. 

Get the items you need to make this