Learn how to make this Swarovski Sparkle Bag Charm | Beads Direct
0

Sparkle Bag Charm made with Swarovski

Products used in this project

Items (7)
Qty
Price
X- Sterling Silver 925 Large Lever Ring Clasp 19mm Pk1
SS81
1
Out of stock
X Sterling Silver Pendant Bail 4x8mm Pk1
SS25
1
Out of stock
X Beadalon Silver Plated Sparkle Crimp Cover 4mm Pk24
F776
1
Out of stock
X-Silver Plated Iron Jumprings 4mm 0.8mm Thick Pk100
F0210
1
Out of stock
Total Cost
£21.41

Not all products are available for this project

Information about this project

Difficulty: Intermediate

Rating:

Learn how to make this Swarovski Sparkle Bag Charm using Swarovski Crystal Star Beads, Swarovski Silver Plated Spacer Bars and Swarovski Bicone Xilion Jet Crystal Beads.

Step 1

Attach your large black star pendant to the bail and add a jumpring.
Attach three jumprings to the jumpring just added.
Crimp a piece of wire approx. 30cm's long onto each individual jumpring.
Add a crimp cover to each and trim any excess wire.

Step 2

Thread six Swarovski bicones onto each piece of wire.
Add one Swarovski star to each piece of wire.
Add one Swarovski bicone to each piece of wire.
Add a Swarovski spacer bar, passing each strand of wire through one hole.
Add one Swarovski bicone, one Swarovski star, one Swarovski bicone and a spacer bar.

Step 3

Pass each piece of wire through the corresponding hole in the spacer bar.
Add one Swarovski bicone, one star, one bicone and a final spacer bar.
Pass each piece of wire through the corresponding spacer bar holes.

Step 4

Add one Swarovski bicone, one star and four bicones to each strand of wire.
Crimp each piece of wire onto the loop attached to the 'O' section of your toggle clasp.
Ensure you crimp them without crossing the wires, as this will cause the pattern to fail.
Slide on your lever ring to complete.