Learn how to make this mixed media 'Sunset Horizon' bracelet | beadsdirect.co.uk
0

Sunset Horizon Bracelet

Products used in project:

Sunset Horizon Bracelet

Items (1)
Qty
Price
Silver Plated Curb Chain 7x12mm 1metre
CH1009
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Sunset Horizon Bracelet

Difficulty: Intermediate

Rating:

Follow the instructions to make this mixed media 'Sunrise Horizon' bracelet, using prism floss craft thread plaited with silver curb chain.

Step 1

Cut chain to the length to fit your wrist, (mine was 14 curbs). then get a Black and Orange multi tonal cord from the pack. Open them out and then fold each one in half  6-8 times.

Step 2

Lay the Black thread horizontally and the Orange thread on top. Then thread the Black thread over the Orange and through the loop of the Black thread and pull tight.

Step 3

Loop both threads through the 1st link of the chain from the back, then thread the Black over the curd chain link and behind the Orange thread, see diagram if stuck.

Step 4

Pull it tight.

Step 5

Then loop the Black thread over the Orange thread, through the back of the next chain link and over. Then pull the thread tight.

Step 6

Then loop the Orange over the Black thread, through the back of the next chain link and over. Then pull the thread tight.

Step 7

Repeat steps 5 and 6 until you reach the end of the chain.

Step 8

Loop the Black thread over the Orange and go throught the last link from behind, (see the diagram if you get stuck)

Step 9

Then thread the Black thread back through the loop and pull tight.

Step 10

Trim ends to fit in the clasp and glue into the clasp. Your bracelet is complete.