Tutorial on how to make this mixed media 'Sunrise Horizon' bracelet | beadsdirect.co.uk
0

Sunrise Horizon Bracelet

Products used in project:

Sunrise Horizon Bracelet

Items (1)
Qty
Price
Silver Plated Curb Chain 7x12mm 1metre
CH1009
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Sunrise Horizon Bracelet

Difficulty: Intermediate

Rating:

Follow the tutorial to make this mixed media 'Sunrise Horizon' bracelet, using silver curb chain plaited with prism floss craft thread.

Step 1

Cut chain to the length to fit your wrist, (mine was 14 curbs). then get a Blue and Yellow multi tonal cord from the pack. Open them out and then fold each one in half  6-8 times.

Step 2

Lay the Blue thread horizontally and the Yellow thread on top. Then thread the Blue thread over the Yellow and through the loop of the Blue thread and pull tight.

Step 3

Loop both threads through the 1st link of the chain from the back, then thread the Blue over the curd chain link and behind the Yellow thread, see diagram if stuck.

Step 4

Pull it tight.

Step 5

Then loop the Blue thread over the Yellow thread, through the back of the next chain link and over. Then pull the thread tight.

Step 6

Then loop the Yellow thread over the Blue thread, through the back of the next chain link and over. Then pull the thread tight.

Step 7

Repeat steps 5 and 6 until you reach the end of the chain.

Step 8

Loop the Blue thread over the Yellow thread and go throught the last link from behind, (see the diagram if you get stuck)

Step 9

Then thread the Blue thread back through the loop and pull tight.

Step 10

Trim ends to fit in the clasp and glue into the clasp. Your bracelet is complete.