'Summer Honey' Necklace
Products used in this project
Not all products are available for this project
Information about this project
Designed by: Katrina
Difficulty: Beginner
Step 1
Cut a length of approx. 7 inches of wire.
Step 2
Bend the wire at the middle point and create a wrapped loop.
Step 3
Thread each end of the wire through both holes of 1 honeycomb bead.
Step 4
Thread a honeycomb onto each of the separate wires so they begin to form the pattern.
Step 5
Twist the end of the wire to hold the pattern in shape.
Step 6
Thread a single bead and repeat step 3 & 4 adding another single bead onto both wires at the end.
Step 7
Trim the wires down to size and create a wrapped loop, tucking the ends of the wire into the wrap.
Step 8
Cut your necklace chain to the desired length and attach the jumpring and clasp to the ends. Find the middle point of the necklace, cut the chain to attach your honeycomb pendant and bee charm using jumprings and a 1cm piece of chain.
What our Happy Customers Have To Say
"every thing"
Joan Kemmett
November 16th 2018
"Thank you very much for the good service!"
Ala Hermanenka
November 3rd 2018
"Excellent company to buy from."
Andrea
October 30th 2018
