Learn how to make our 'Harmony' Bracelets, using PVC tubing and Shamballa fashion Tubes. | beadsdirect.co.uk
0

Sparkly 'Harmony ' Bracelet

Products used in project:

Sparkly 'Harmony ' Bracelet

Items (1)
Qty
Price
Glue Beadalon G-S Hypo Cement 1/3oz
W139
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Sparkly 'Harmony ' Bracelet

Rating:


Black/White Sparkly Harmony Bracelet
1x Silver Connector and Charm Carrier [F903]
1x Silver Heart Charm [CR210]
1x Black/White Shamballa Fashion Tube [MB478]
1x Transparent PVC Tube [TC512]
1x Silver Plated Jumpring


Purple/White Sparkly Harmony Bracelet

1x Clear  Swarovski Crystal [AC1012]

1x Silver connector [F901]

1x Purple/White Shamballa Fashion Tube [MB479]

1x Purple PVC Tube [TC514]

1x G-S Hypo Cement Glue [W139]


Brown/White Sparkly Harmony Bracelet

1x Gold Connector and Charm Carrier [F902]

1x Brown/Yellow Shamballa Fashion Tube [MB477]

1x Brown PVC Tube [TC509]

1x Gold Heart Charm [CR191]

1x Gold Plated Jumpring


Step 1.Cut the tubing to fit around your wrist.

Step 2. Push the connector into one end of the tubing. Thread on the sparkling tube bead.

Step 3. Push the other end of tubing on to close the bracelet. 

Step 4. If you are making the bracelet with the crystal you will need to add a dab of glue to the inside of the connector and glue in the crystal. If you are making the bracelet with the charm, attach the charm to the connector.

When the glue is dry, put your bracelet on by stretching over your hand, or pull one end from the connector and ask a friend to fasten it!