Silver Moda Bangle
Products used in this project
Not all products are available for this project
Cut two pieces of cord approx. 20cm long. Thread one piece through the hole in one end of the bangle. Repeat on the other side using the other piece of cord.
TIP – you might need to paint with clear nail varnish or use a thread zapper to harden the ends of the cord so they pass through the holes more easily.
Thread the 2 ends from one side of the bangle through the hole in the side of the slider bead, and through to the bottom hole. Repeat this on the other side.
Thread a bead on to each of the 4 ends and knot to keep the bead in place at your desired length. Cut off any excess cord.
What our Happy Customers Have To Say
"The customer service was absolutely brilliant in helping me with sending me pictures of these chains, thank you very much Olivia, you couldn't have been more helpful."
April 24th 2018
"I felt I had to comment on how helpful Olivia in your Customer Service Team is... 10 out of 10 for customer service Beads Direct - you deserve a pat on the back!"
April 16th 2018
"I love your projects , helps me feel better encourages and helps me with my new designs?"
April 5th 2018