Silver 'Deep Sea Treasure' Bracelet
Difficulty: No level set
Attach a jump ring to the second loop in on the spacer bar. Place your first loom band through the jump ring and create an infinity shape over 2 pegs of your loom. Begin a fishtail braid, instructions can be found below.
Braid approx. 4.5cm and then remove from the loom. Instead of attaching to an s or c-clip, attach a bead to an eye pin and secure your loom braid by catching the ends in the eye pin loop.
Repeat steps 1 and 2 on the other bar, and attach to the same bead so the loom bands are joined in the middle. Repeat the same process again to create the second row of loom bands.
Connect two rows of beads using eyepins and attach to each outer loop on the spacer bar.
Now only the centre loop should be left. Cut a piece of cupchain to fit and use cupchain ends and jump rings to join each end to the spacer bar.
To finish your bracelet attach the toggle clasp using jump rings.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this