Silhouette Necklace

Products used in this project

Items (0)
Total Cost

Information about this project

Difficulty: Intermediate


Follow the tutorial on how to make this silhouette of a lady on a swing shrink plastic necklace.  Click here to download the image to make this necklace below (the print size is the correct size). You can use your oven or you can add the shrinky dink heat tool (SP17)

Step 1

Print out the PDF with the images at the right size here.

Step 2

Draw the silhouette and carefully cut it out and hole punch holes at least 2-3mm in from each hand and top corners of the seat.

Step 3

Shrink the th image in the oven or with a heat gun .

Step 4

Leave to cool, place jumprings in the holes with 2 in the hands.

Step 5

Undo the clasp part off your chains at the jumprings so that you have just 2 lengths of chain. Trim 5cm of chain off each chain.

Step 6

Attch the 5cm chain from the hands to the seat. Get it as tight as possible and trim off excess.

Step 7

Join the 2 long chains together with a jumpring and the attach each end to the hands.

Step 8

Adjust length to suit you. Your necklace is complete.