Create this 'Serpente Shimmer' Necklace | beadsdirect.co.uk
0

'Serpente Shimmer' Necklace

Products used in project:

'Serpente Shimmer' Necklace

Items (3)
Qty
Price
X Antique Silver Steel Mesh/Net 3mm Chain 1metre
CH220
1
Out of stock
Silver Plated Chain Extension 4x57.1mm with Teardrop Pk6
F200
1
Out of stock
X Silver Plated Charm Setting Pack 2 for 8mm Chaton
CR596
2
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

'Serpente Shimmer' Necklace

Difficulty: Intermediate

Rating:

Create this 'Serpente Shimmer' Necklace using Swarovski Crystal Chatons.

Step 1

Start by taking 4 connector charm settings and attach cord ends to each one on both sides.

Step 2

You now need to link the connector settings together with chain...
Cut 4.5cm of chain.  Glue this to the cord end to the left of one of the connector settings. Then cut 11.5cm of chain and glue to the cord end on to the right of the connector setting.  Leave to dry.

Glue the other end of the chain to the second connector setting. Leave to dry.

Cut 15.5cm of chain and glue this to right side of the connector setting. Leave to dry.

Glue the other end to the third connector setting. Leave to dry.

Cut 12.5cm of chain and glue this to the right side of the connector setting. Leave to dry.

Glue the other end to the fourth connector setting. Leave to dry.

Cut 4.5cm of chain and glue this to the right side of the last connector setting.

Step 3

Using pliers, fold the necklace ends around the end chains. Attach a jumpring to one end and a chain extension to the other.

Step 4

Glue the Chatons to the connector settings, alternating the colours.