'Serpente Shimmer' Bracelet
Products used in this project
Not all products are available for this project
Step 1
Start by taking 3 connector charm settings and attach cord ends to each one on both sides.
Step 2
You now need to link the connector settings together with chain...
Cut 4.5cm of chain. Glue this to the cord end to the left of one of the connector settings. Then cut 17cm of chain and glue to the cord end on to the right of the connector setting. Leave to dry.
Glue the other end of the chain to the second connector setting. Leave to dry.
Cut 12.5cm of chain and glue this to right side of the connector setting. Leave to dry.
Glue the other end to the third connector setting. Leave to dry.
Cut 3.5cm of chain and glue this to the right side of the connector setting. Leave to dry.
Step 3
Using pliers, fold the necklace ends around the end chains. Attach a jumpring to one end and a chain extension to the other.
Step 4
Glue a Fuchsia chaton to the middle setting, and a Turquoise chaton to the settings either side.
What our Happy Customers Have To Say
"Beads Direct is a wonderful supplier, the staff are fantastic, knowledgeable, friendly, super helpful and extremely efficient, reliable and honest."
Roz
October 9th 2019
"Just used my new kumihimo handle and weighted bobbins and they are great. My kumihimo has never been so neat and the thread/ weave so tight. It's great."
Rosie
September 25th 2019
"Fab company"
Sue M
August 13th 2019
