Sale Make Darling Cameo Necklace
Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
1. Thread all the Jade beads from two strands onto beading wire. Attach each end to the toggle ends by threading through crimp beads and adding crimp covers.
2. To create the pendant - attach Oval setting to a 5mm jumpring. Attach small heart charm to another 5mm jumpring. Attach the small heart charm to the large Oval setting via the small hole at the top of the setting. Attach the completed pendant onto the necklace with a 6mm jumpring.
Please note - as you only need 1x6mm and 2x5mm Jumprings in this necklace, please remove these products from your basket if you have them in your stash.
3. Choose a picture to add to the setting. Press the photo over the top of the Oval setting and press the edges of the area of the photo you want in the necklace down to create a cutting guide. Carefully cut the photo out using a craft knife or scissors. Apply the picture with a small amount of gluestick on the back of the photo. We have used a printed photo of Clara Bow in our design.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this