Learn how to make this Rose Gold Layered Necklace | beadsdirect.co.uk
0

Rose Gold Layered Necklace

Products used in project:

Rose Gold Layered Necklace

Items (8)
Qty
Price
"X" 5860 Swarovski Glass 16mm Coin Pearl Crystal Rose Gold Pk5
HH317
1
Out of stock
5328 Swarovski Crystal Bicones Xillion 4mm Crystal Clear Pk24
AC67
2
Out of stock
5810 Swarovski Glass Pearls 6mm Crystal Rose Gold Pk50
HH226
1
Out of stock
Rose Gold Plated Findings Kit 10 Styles Includes Box
ST221
1
Out of stock
5810 Swarovski Glass Pearls 3mm Crystal Rose Gold Pk100
HH252
1
Out of stock
X Rose Gold Plated Zamak 3 Strand Fancy Clasp 26mm 1xPair
F0086
1
Out of stock
5328 Swarovski Crystal Bicones Xillion 4mm Rose Gold (Full Coating) Pk24
AC1098
2
Out of stock
5328 Swarovski Crystal Bicones Xillion 3mm Crystal Silver Pk24
AC569
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Rose Gold Layered Necklace

Designed by: Laura

Difficulty: Intermediate

Rating:

Learn how to make this Rose Gold Layered Necklace using sparkling Swarovski Elements and rose gold findings.

Step 1

Cut 2 strands of wire measuring 19", and 17".
Attach one end of each wire to one of your bars two outer loops using crimp beads.

Step 2

Cut a third wire measuring 7" and attach this to the centre loop on the bar with a crimp bead.
Cut another wire measuring 7" and attach this to the centre loop of the other bar with a crimp bead

Step 3

Starting with the 17" wire, thread on 5x 3mm pearls, 2 rose gold bicones, 1 white bicone, 2 clear bicones, 1 white bicone, 2 rose gold bicones, 5x 3mm pearls, 1 white bicone, 1 clear, 1 rose gold, 1 clear, 1 white, 5x 3mm pearls, 3 white bicones, 2 clear, 1 rose gold, 2 clear, 3 white, 2x 6mm pearls, 1 coin pearl, 3x 6mm pearls, 2 white bicones, 2 clear bicones, 5 rose gold bicones.
Repeat this pattern in the opposite direction starting with 2 clear bicones. 

Thread the wire and crimp the other end of the wire to the other bar to make the shortest layer.
Trim any excess wire.

Step 4

For the middle wire (7" wire), thread on 7x 3mm pearls, 1 rose gold bicone, 1 clear, 2 white, 1 clear, 1 rose gold, 3x 3mm pearls, 5x 3mm clear bicones, 3x 3mm pearls, 5x 3mm clear bicones, 3x 3mm pearls, 1 rose gold bicone, 1 clear, 2 white, 1 clear, 1 rose gold, 3x 3mm pearls, 1 white, 1 4mm clear, 1 3mm pearl, 1 3mm clear bicone, 1 3mm pearl, 1 3mm bicone, 1 3mm pearl, 1 4mm clear bicone, 1 white, 2x 3mm pearls, 1 rose gold bicone. 
Thread on a crimp bead, one side of your heart connector, and go back through the crimp. 
Squash the crimp bead to secure and trim any excess wire. 

Cut another section of wire approx. 4" long.
Thread one end through a crimp, through the other side of the heart connector and back through the crimp.
Squash the crimp bead and leaving just 2mm tail. 

Thread on 2x rose gold bicones, 2  clear 4mm bicones, 2 rose gold, 4x 3mm pearls,  1 rose gold bicone, 4 3mm pearls, 2 rose gold bicones, 3 clear bicones, 2 rose gold bicones, and a crimp bead. Thread through one side of another heart connector and secure with the crimp bead. 

This is the centre of the middle thread on the necklace.

Repeat the first pattern in this step for the other side of the necklace and attach this to the other side of the heart connector.

Step 5

For the longest, lowest wire, thread on 7 3mm pearl beads, 1 white bicone, 1 clear, 2 rose gold, 1 clear, 1 white, 5x 6mm pearls, 1 coin pearl.
Repeat this pattern until you reach the end of the wire and have used 3 coin pearls, the 2nd one should sit in the middle of the wire. 

Attach the other end of the wire to the bar clasp with a crimp bead. 

Step 6

Attach 2 3"lengths of chain to the outer loop on your bar clasps using jumprings, and add a jumpring to one end, and a jumpring and lobster clasp to the other chain.