Rolling Stones Bracelet | Beads Direct

Rolling Stone

Information about this project

Designed by: Laura

Difficulty: Intermediate


This design is from our inspirations archive. As this design was created some time ago we sadly no longer stock all the products to create our design, but can still be useful for inspiration.

Step 1

Cut 3 strands of beading wire, each measuring approx. 25cm.


Step 2

 Take one part of the magnetic clasp.

Step 3

For each strand thread a crimp bead onto the wire, then through a loop on the clasp, and then back  through the crimp. Squish the crimp into place.


Step 4

 For the two outer strands thread on 9 hematite beads. For the middle strand thread on 8 hematite beads.

Step 5

Thread on the cross bead  so that the shorter part of the cross goes on first and through the middle. Thread the two outer strands through the centre hearts on the cross

Step 6

 Add 11 hematite beads to the outer strands and 8 hematite beads to the centre strand.

Step 7

For each strand thread on a crimp then thread through the loops on the other part of the clasp,  go back through the crimp and squish into place.

Step 8

Trim any excess wire, your bracelet is now ready to wear.