Rainbow Rockpool Bracelet
Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
Cut 4 x 1.5m strands of s-lon and set up your board for an 8 strand braid. The middle of each strand should cross over the centre of your board.
Thread 20 shell chips on to each of the strands.
Create a 3/4 of a centimeter of unbeaded braid then add a bead each time you work with a strand. When you reach the desired length create another 3/4 of a centimeter of unbeaded braid.
Before taking off the board add a dab of glue on the treads and then cut off and trim so the it will fit into your clasp.
Glue the ends in to the cord ends (it is a tight fit so try it before adding the glue) to finish.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this