Grip the end of your memory wire with round nose pliers. Bring it round gradually to create a loop. This can be tricky as the wire is very hard, so grip tightly and turn it gradually. Keep turning until the loop closes.
Thread your beads on to the wire.
If necessary, cut your memory wire approx. 1cm above the last bead using hard wire cutters (you may find some of these in a man's tool kit!). If you don't have any of these cutters just keep adding beads until you have only got 1cm of wire showing. You may need more than one pack of beads to do this so you will need to alter your materials to account for this.
Turn a loop at the other end following the instructions in step 1.
Attach the Swarovski Heart to the end loop using a large Jumpring.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this