0

Quartz Champagne Bubbles

Products used in this project

Information about this project

Difficulty: Beginner

Rating:

Learn how to make all 3 of the Champagne BubblesBracelets by following the step by step instructions.

Please note: The Multi Coloured Quartz listed in the products are larger than the ones photographed.
 
When working with elastic cord we always advise that you double the cord over when stringing beads where possible. The pearl beads used in this project have very small holes. We would suggest using a bead reamer to increase the hole size slightly allowing 2 cords of elastic to run through.

Step 1

How to make the Quartz Champagne Bubbles Bracelet.

STEP 1: Cut 2 pieces of elastic, each measuring approx. 30cm
STEP 2: Thread on your quartz bead followed by 6 snowflake spacer beads, thread on another quartz bead and continue following this pattern until you are happy with the size.
STEP 3: Tie a double knot on each of the elastic cords. You can tie an additional knot over top if you wish. Cut off any excess cord.
STEP 4: For added security add a dab of clear nail varnish over the knots.

Step 2

How to make the Pearl Champagne Bubbles Bracelet.

STEP 1: Cut approx. 30cm of elastic cord
STEP 2: Thread on 1 shamballa fashion bead followed by a snowflake spacer bead and then a freshwater pearl.
STEP 3:Continue to add 1 snowflake spacer bead along with a freshwater pearl. Continue to follow this pattern until you are half way round your bracelet and add another shamballa fashion bead.
STEP 4: Repeat step 2 until you reach the end of your bracelet.
STEP 5:  Bring the bracelet together, tie a double knot in the elastic. You can tie an additional knot over top if you wish. Cut off any excess cord.
STEP 6: For added security add a dab of clear nail varnish over the knots

Step 3

How to make the Double Pearl Champagne Bubbles Bracelet.

STEP 1: f you have a bead reamer tool we would suggest that you should make the holes bigger in the pearls before starting this project.
STEP 2: Cut 2 pieces of elastic, each measuring approx. 30cm
STEP 3:Follow this pattern: Thread on 1 shamballa fashion beads followed by a freshwater pearl. Add 30 Snowflake spacer beads, 2 freshwater pearls, 10 snowflake spacer beads, 2 freshwater pearls, 30snowflake spacer beads, 1freshwater pearl, 30 snowflake beads and finally 1 freshwater bead.
STEP 4: Bring the bracelet together, tie a double knot in the elastic. You can tie an additional knot over top if you wish. Cut off any excess cord.
STEP 6: For added security add a dab of clear nail varnish over the knots.