0

Purple Heart Bar Bracelet

Products used in this project

Items (0)
Qty
Price
Total Cost
£3.85

Information about this project

Difficulty: Beginner

Rating:

This design is from our inspirations archive. As this design was created some time ago we sadly no longer stock all the products to create our design, but can still be useful for inspiration.

Please note the measurements given are based on the average woman’s wrist size. You may want to adjust the length of the cord depending on who you are making it for.

TIP. Make sure the cord is flush before gluing it in, or you can try and twist the suede for a different effect.

If you would like to buy the products to make this bracelet you can click on the 'add all products to basket' button below.

You should have a total of 4 products in your basket. Should you find that you have less than 4 products something could be missing?  You can contact our customer service team at service@beadsdirect.co.uk and they will be more than happy to try and find you a suitable alternative.

Step 1

Start of by seeing how long your 2 pieces of suede you need by placing the bracelet bar with crystal heart on your wrist and then NOT cutting the cord place in the open end and then wrap it round the heart end and then back to the open end (leaving a little bit of slack so you can hook it round the heart)

Step 2

Once you know how long a piece of suede you need cut 2 piece of the Purple coloured Suede cord. (Mine was 22cm long each).

Step 3

Fold over and cut the ends level (DO NOT cut the looped end).

Step 4

Glue the cut ends into the open end of the bracelet bar (make sure the cord is flush before gluing it)

Step 5

Once dried, place the crystal charm bead over the folded end to make a sliding loop.