*Same Day Despatch *No Minimum Order *Secure Payment *No Hassle Return. 

Don't forget to SAVE today, enter - HIGHFIVE (£5 off £25) or HIGHTEN (£10 off £35)  at the Checkout!

Beads Direct - Beads for jewellery making, beads for craft and beadwork, semi-precious gemstones, glass beads, Swarovski Crystallized Elements, seed beads, silver beads, jewellery findings and more 0

Basket Summary


Neptune's Necklace

Neptune's Necklace

Neptune's Necklace

Products used in the project

Item QTY Price

Silver Plated Findings Kit 10 Styles Includes Box


1 £7.99

Beadalon 7 Strand Flexible Beading Wire 'Satin...


1 £3.91

Rhodium Plated Steel Chain 2x3mm 1metre


1 £4.37

Some of the products required to make this item are either out of stock or no longer available.

Total Cost = £16.27
Add all products to basket

Step 1

Cut around 8" of wire. Fold one end of the wire over about half an inch and secure the folded end with a silver callote.
Thread a jumpring onto the callote and close the hook to secure the jumpring.

Step 2

Thread one 4mm silver bead onto the wire, catching the loose bit of folded wire inside of it and the following beads so that it is hidden. 

Step 3

Start to choose the smallest and lightest of the Tourmaline tooth nugget beads and thread them on so that the increase in size and darkness towards the middle of the wire, and then decrease in size and darkness towards the other side of the wire.
This should use around 50 to 60 Tourmaline tooth beads.
Finish the strand with another 4mm silver bead.

Step 4

Finish the strand by folding the wire again close to the end bead.
Thread the folded bit of wire into the necklace to hide it under the beads.
Secure the folded end with a silver callote.
Thread a jumpring onto the callote and close the hook to secure the jumpring.

Step 5

Measure out 4 strands of Rhodium Plated Brass Chain, each measuring 5".
If you want your necklace to be longer or shorter, alter this length of chain accordingly. 

Step 6

Attach two of the chains to the jumpring on both end of the wire with Tourmaline tooth nuggets on it.

Step 7

Attach the two loose ends of chain to a jumpring, and repeat on the other side of the necklace. 

Step 8

On one end of the necklace open the jumpring and attach the heart hoop for the toggle clasp.
On the other end of the necklace open the jumpring and secure the stick part of the toggle clasp.

Get Your Materials!

Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home. 

Get the items you need to make this