Morning Haze Jewellery Set

NECKLACE

1. Cut an 18 inch length of wire and thread on the desired amount of Rose Quartz & Aventine beads.
2. Thead a calotte, followed by a crimp bead onto each end of the wire.
3. Crush the crimp bead with your pliers aprox 1 inch from the ends of the wire.
4. Trim the excess wire.
5. Close the calottes over the crimp beads and attach a jumpring to each end.
6. Secure your necklace with a lobster clasp onto one of the jumprings.

1. Cut the wire to the wrist size + 2 inches.
2. Thread on your beads alternating between Rose Quartz and Aventuine for each inch or so.
3. Thead a calotte, followed by a crimp bead onto each end of the wire.
4. Crush the crimp bead with your pliers aprox 1 inch from the ends of the wire.
5. Trim the excess wire.
6. Close the calottes over the crimp beads and attach a jumpring to each end.
7. Secure your bracelet with a lobster clasp onto one of the jumprings.

EARRINGS

1. Thread 3 or four Rose Quartz beads onto a head pin.
2. Bend the head pin horizontally above the beads and trim to 1cm.
3. Form a loop with your round nose pliers.
4. Attach a jumpring to the loop and secure to the earwire.
5. Repeate with the Aventurine beads to make an odd pair for an edgy look!