Create this 'Monochrome Memories' Bracelet |

'Monochrome Memories'

Products used in project:

'Monochrome Memories'

Items (2)
Stainless Steel Memory Wire Bracelet Bright 12 Loops
Out of stock
X-Silver Plated Iron Jumprings 7mm 0.8mm Thick Pk100
Out of stock
Total Cost

Not all products are available for this project

Information about project:

'Monochrome Memories'

Difficulty: Beginner


Create this 'Monochrome Memories' Bracelet using your free Glass Bead Mix and memory wire.

PLEASE NOTE: This design was created using the free gift when spending over £20 during the Bank Holiday Weekend (21 - 25 Aug '14).

Step 1

Grip the end of your memory wire with round nose pliers. Bring it round gradually to create a loop. This can be tricky as the wire is very hard, so grip tightly and turn it gradually. Keep turning until the loop closes.

Step 2

Thread your beads on to the wire black and white alternate.

Step 3

If necessary, cut your memory wire approx. 1cm above the last bead using hard wire cutters (you may find some of these in a man's tool kit!). If you don't have any of these cutters just keep adding beads until you have only got 1cm of wire showing. You may need more than one pack of beads to do this so you will need to alter your materials to account for this.

Step 4

Turn a loop at the other end following the instructions in step 1.

Step 5

Attach your Swarovski heart to the end loop using a large jumpring.