Monochrome Madness Chain Necklace | Beads Direct

Europe's no.1 beading & jewellery making supplier

Monochrome Madness

Products used in this project

Items (1)
Total Cost

Not all products are available for this project

Information about this project

Difficulty: Intermediate


This design is now in our inspirations archive. As this design was created some time ago we sadly no longer stock all the products to create our design, but can still be useful for inspiration.

Step 1

Open up two of the smaller (24mm) silver jump rings and attach approx. 48cm of black and white chain, the same length of silver chain, and another black and white chain between the two rings. Close the rings (you can open and close these larger rings by hand, but make sure you close them tightly).

Step 2

Open two of the larger twisted rings. Attach one to each of the smaller rings and close. Open two black and white rings and attach to the large twisted rings. Now add two silver 24mm rings to either side, followed by one of the same rings either side. Follow this with a black and white ring either side, followed by a large twisted ring then another black and white ring either side. Join the last two black and white rings with a large twisted ring.

Step 3

Add a black and white ring to the bottom of the last large ring. Before you close it, hang on 4 silver lengths of chain between 10 and 12cm, and 2 black and white lengths of chain between 13 and 14cm in length.