Messina Renaissance Bracelet
Difficulty: No level set
What you will need:
2x Magnetic 6mm Barrel [F778]
1x Silver Slider [F840]
1x Silver Slider Buckle [F863]
1x Nappa Leather Silver Snake Skin [TC414]
1x Fevi Kwik Glue
Step 1. Cut 2 pieces of nappa leather- Make sure that the length of this nappa leather will fit comfortably around you wrist. At this stage it is better to overestimate the length as you can trim it at a later stage.
Step 2. Thread the two pieces of Nappa Leather through the buckle slider. Slide on your metal slider (F863), then thread the nappa leather back through the buckle slider. The metal slider should act as a stopper to prevent the nappa leather from coming away from the slider.
Step 3. Once you are happy with the size of the bracelet glue the magnetic clasps onto the ends of the nappa leather.
Hint: When applying glue to your clasp ensure that the magnets are separated otherwise the glue may seep through and glue the clasp shut.
Step 4. When gluing the magnetic clasps you will also need to ensure that the both clasps are not repelling. Both clasps need to sit side by side. Leave to dry for a few moments.