Mermaids Mirage Earrings
Designed by: Jaide Lillie
Firstly, take your EZ-Rivet Tool and place the cabochon under the piercing point where you wish to add your jumpring.
Grasp the cabochon tightly and pierce through by twisting the handle bar in a clockwise motion. Make sure you continue to hold the cabochon when unscrewing the Rivet Tool to avoid any damage.
Using the Findings Kit, take a thin 7mm jumpring and attach it through the hole you have just pierced but don't close it. You can then take an eyepin and push through a large 6mm round from the kit . You should then trim the eyepin and loop. The Beadsmith 1-Step Looper will come in handy. Attach one of these loops to the 7mm jumpring and close.
To finish off your earrings, you will simply need to open the top loop of the eyepin with the 7mm round attached and hook it to an earwire (you will also find this in your Findings Kit).
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this