Preciosa Pressed Glass Square Beads Clear/Silver 8mm Pk30
5061 Swarovski Square Spike One Hole Bead 5.5mm Crystal Metallic Lt Gold Pk6
Amber and White Preciosa Czech Glass Flower 14mm Pk10
5950 Swarovski Crystal Fine Rocks Tube Bead 30mm Gold Plated Golden Shadow Pk1
Rose Gold Plated Zamak Cord Ends 13x16mm for 7x10mm Cords Pk2
£5.27 Now: £2.64View Product
Antique Silver Brass 6mm Ball Rivet Screw Bar 5x19mm Pk1
£1.44 Now: £0.72View Product
Gold Plated Zamak Cord Ends With Loop 12x22mm for 7x10mm Cord Pk2
£4.80 Now: £1.92View Product
Gold Plated Zamak Charm Tag 19x30mm and Heart 10mm Pk1
£2.52 Now: £1.26View Product
Letter S Bracelet
Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
Difficulty: No level set
Rating: 0 Stars
What you will need:
1x Rhinstone Letter S [MB500]
1x Navy Shamballa Cord [TC401]
1x Gunmetal Hematite [EX8]
1x Glue or a Thread Zapper [W272]
For this bracelet you will need to know how to do a basic square knot. This knot is often referred to as a Shamballa Knot. Detailed instructions on how to make a Shamballa Fashion Bracelet which consists mainly of Shamballa Knots can be downloaded here.
Once you have learnt how to make a square knot you are ready to make this bracelet.
Step 1. Cut a 2 x20cm piece of Shamballa Fashion Cord and tie a knot in one end of both pieces.
Step 2. Thread on an ‘end bead’ (we recommend an 8mm Hematite Bead EX8).Measure 10cm from your first knot and tie another on both pieces.
Step 3. Get 1 of your pieces of cord and thread the opposite end through the hole on your letter ‘S’ and tie a knot.
Step 4. Repeat this step on the other side of the letter.
Step 5. You may want to put a safety pin through the knot nearest to the letter and attach it to a bead mat.
Step 6. Cut another piece of Shamballa Fashion Cord measuring approx. 50cm in length. Find the centre of this cord and place that over the knot nearest to the letter.
Step 7. You will now need to start square knotting from here. Make 13 square knots
Step 8. Repeat steps 5-7 on the other side of the letter
Step 9. You should now have 13 complete square knots on both sides of the letter. Once you are happy with the length add a dab of glue or use a thread zapper to secure.
Step 10. You will now need to make the adjustable part of the bracelet. This needs to have 7 complete square knots. For instructions on how to make the adjustable part click here and refer to Step 7/8. of the Shamballa Fashion Bracelet Instructions
Your bracelet is now complete