Let There Be Love Bracelet p. 21
Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
Cut 2 pieces of fabric chain (CH1137). They will each need to be 9 links long.
Lay the 2 heart connector charms (CR148) back to back and attach to both pieces of the fabric chain.
Lay your fabric chain flat and decide where you would like to place your charms.
Attach the charms using the jumprings (F612) or headpins (F607). To add extra depth to the piece simply attach some of the smaller charms and/or beads to some chain (CH102) and then attach to the bracelet.
If you are using the Fimo Roses in your design you will need to place a bead on the head pin before putting the rose on the headpin. This will stop the headpin from slipping straight through the Fimo Rose.
Add your ribbon bows.
Attach one half of the magnetic clasp (F751) to each end of the fabric chain. (It’s best to leave this until last as the magnets can get in the way when making your bracelets.
There you have it, “Let there be Love” Bracelet!
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this