Lacey Agate Bracelet |

Lacey Wave Bracelet

Products used in project:

Lacey Wave Bracelet

Items (6)
CrystaLove™ crystals / glass / round / 4mm / crystal / 100pcs
Out of stock
TOHO™ / Round 6/0 / Ceylon / Snowflake / 10g
Out of stock
Firepolish ™ / 40pcs / 4mm / AB / Sapphire
Out of stock
Firepolish ™ / 4mm / AB / Lt. Colorado Topaz / 40 pcs
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Lacey Wave Bracelet

Designed by: Vicki

Difficulty: Beginner


Create a pretty cuff style bracelet in light hues, using a mixture of your favourite 4mm beads centred around an eye catching Connector. Ready? Let's get creative! 

You can add all the items you need to your basket by clicking the box in the 'Products used' section above, or you can let your imagination run wild and choose your own materials from the links below. Please note that the colours for the products illustrated in the image above may not match the 'Products List'. 

  • S-Lon
  • Connector
  • 4mm Beads - Vicki used shades of White, Blue, Rose Gold & Copper
  • Scissors

We believe that your jewellery should be as individual as you are and so our tutorials are for inspiration and learning purposes. They include links to the relevant categories for you to choose your own colour combinations and we positively encourage you to experiment with different shapes, sizes, finishes, composition and texture. Why not choose your own beads and colours to achieve something in your own style? Let your creative imagination run wild and make your dream piece of jewellery.

Designed by Vicki - September 2016

Step 1

Cut x12 pieces of S-LON cord approx. 40cm long.

Step 2

Take one of these pieces of S-LON and tie to one of the small holes on the edge of the connector, knot a couple of times and trim.

Step 3

Thread 20 beads randomly on the the thread and tie a knot.

Step 4

Repeat steps 2 and 3 until all holes of the connector have a string of 20 beads attached.

Step 5

Cut 2 pieces of thread, 40cm long. These  will be used as a double thread to create a stronger sliding knot.

Step 6

Cross one sides end threads with the other side and tie on the previously cut double thread, so you have equal lengths either side.

Step 7

Create the sliding knot by doing 6 complete Macramé Flat Knots.

Beginners can view this useful video tutorial for help with this step: Macramé Knotted Bracelets 

Step 8

Knot the ends on the underside of the bracelet and trim. You may want to add a dab of glue to secure the knots.

Step 9

Thread x2 beads on to two strands together and knot, leaving a length long enough to get your bracelet on and off.

Step 10

Repeat step 9 until all strands have beads. You will have 3 strands on either side.