Kyrenia Wrap Bracelets
Designed by: Katrina Rose
Cut a length of cork effect cord that is long enough to wrap around your wrist 3 or 4 times, leaving approx. 1cm between the two ends meeting on the underside of your wrist.
To one end, piece the cord approx. 2/3mm from the end and thread on a jumpring.
Attach your extension chain to this jumpring.
Repeat on the other end of the cord and add a lobster clasp instead of the extension chain.
Arrange your bracelet on your wrist and find the centre point of the top or second cord which you will hang your charm on.
Pierce the top of this cord so you can thread a jumpring over the top edge and through the hole.
Hand your chosen pendant from this jumpring.
If you are adding several charms, measure gaps of approx. 1.5cm and pierce holes for more jumprings.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this