Kumihimo Seedmix Bracelet
Products used in this project
Not all products are available for this project
Information about this project
Difficulty: Expert
If you have not created a kumihimo braid before you will also need: Kumihimo braiding disk and No Tangle Bobbins.
P.S. I had 10 of each seed bead left over when making mine to fit a 5 1/2 inch wrist.
Step 1
Cut 4 x 1.5m strands of s-lon and set up your board for an 8 strand braid. The middle of each strand should cross over the centre of your board.
Step 2
Thread 50 size 8 beads on to each horizontal strands., then thread 50 Fringe beads on the vertical strands.
Step 3
Create a 3/4 of a centimeter of unbeaded braid then add a bead each time you work with a strand. When you reach the desired length create another 3/4 of a centimeter of unbeaded braid.
Step 4
Before taking off the board add a dab of glue on the treads and then cut off and trim so the it will fit into your clasp.
Step 5
Glue the ends in to the clasp to finish.
What our Happy Customers Have To Say
""
Hannah T
April 22nd 2019
"Wow what service"
Fiona Lawrence
January 24th 2019
"I love Beads Direct."
Paula
January 21st 2019
