Beads Direct On Tour with Sharon Kamil | Beads Direct
0

Europe's no.1 beading & jewellery making supplier

Key Ring / Bag Charm Inspired by Sharon Kamil

Products used in this project

Items (2)
Qty
Price
Total Cost
£1.20

Not all products are available for this project

Information about this project

Difficulty: Intermediate

Rating:

What you will need...

1x 'Lion' Beach Bead [BB22]
1x Pandora Style Wood Beads [BO583]
1x Red Brown 2mm Round Leather Cord [TC516]
1x Black Cut Glass Rondelle [BG905]
1x Antique Silver Lobster Clasp [F850]
1x Trinity Brass Antique Silver Bird Charm [TS135]
1x Magnesite Turquoise Round [EX3098]
1x Dark Brown Waxed Nylon Cord [TC437]
1x Preciosa Czech Glass Rondelle [BG914]
1x Japser Round Beads [EX3180]

Please note: You will also need 1 jump ring approx. 5mm in size.

STEP 1: Cut a 20cm piece of leather cord and fold one side approx. 5-6cm down the cord. Tie a knot to create a loop. Thread a black glass rondelle bead over the ends and place it next to the knot. Fold over the other end and knot next to the bead. Trim off the ends.

STEP 2: Attach a jump ring to the lobster clasp, add the swallow charm, then tie a 15cm piece of shamballa fashion cord to the ring.

STEP 3: Thread your semi precious beads, wooden beads, and beach beads to your shamballa cord until you reach your desired length (allowing for the leather part you made earlier, you will attach this shortly).

STEP 4: Tie the end of the shamballa cord around the leather loop and use a thread zapper to secure the knot. To wear, clip to the other leather loop using the lobster clasp.
 

Step 1

Cut a 20cm piece of leather cord and fold one side approx. 5-6cm down the cord. Tie a knot to create a loop. Thread a black glass rondelle bead over the ends and place it next to the knot. Fold over the other end and knot next to the bead. Trim off the ends.

 


 

Step 2

Attach a jump ring to the lobster clasp, add the swallow charm, then tie a 15cm piece of shamballa fashion cord to the ring.

Step 3

Thread your semi precious beads, wooden beads, and beach beads to your shamballa cord until you reach your desired length (allowing for the leather part you made earlier, you will attach this shortly).

Step 4

Tie the end of the shamballa cord around the leather loop and use a thread zapper to secure the knot. To wear, clip to the other leather loop using the lobster clasp.