0

Keep Calm Neon Purple Bracelet

Information about this project

Difficulty: Intermediate

Rating:

Follow the steps to make this bright Neon Purple bracelet with a 'Keep Calm and Rule' tag riveted onto neon flat rubber cord.

Step 1

Measure approx. 9cm from the end of the neon flat cord and use the rivet tool to cretae a hole. Enlarge the hole with round nose pliers. Now place the rivet through the 'Keep Calm' connector and through the hole in the cord. Add a dab of glue to the rivet back and carefully press on.

Step 2

Line the 'Keep Calm' connector up so it sits in the centre of the flat cord and use the rivet tool to create another hole. Enlarge the hole then place the rivet through and secure as in step 1.

Step 3

Cut the flat cord approx. 6cm from each end of the connector (or to fit your wrist) and glue in to the clasp.