Tutorial on how to make this Infinity paracord bracelet | beadsdirect.co.uk

Infinity Paracord Bracelets

Products used in project:

Infinity Paracord Bracelets

Items (0)
Total Cost
Information about project:

Infinity Paracord Bracelets

Difficulty: Intermediate


Make your own Survival Infinity Paracord Bracelet using the sqaure knotting technique and following the step by step tutorial.

For the purpose of these instructions I have used 2 colours so that you know which cords I am talking about in the steps. You will be using the same colour (you can mix them if you like) 

Please note that the measurements used in these instructions are designed for a 5 1/2 inch wrist.

Step 1

Cut 2 lengths of cord . The first one measuring roughly 55cm ( if you are using the finding you only need a 35cm length of cord (Orange Cord)) and the other 150cm (Purple Cord). Lay it out like tin image 1.

Step 2

Starting a few centimeters down from the loop begin the square knotting technique.

Step 3

Keep going until you have 6 V patterns.

Step 4

Place your infinity charm on one of the centre cords.

Step 5

Flip the charm over and start the square knotting technique.

Step 6

Make another 2 V patterns.

Step 7

Loop the other centre cord through the other end of the infinity charm.

Step 8

Continue the square knotting and keep going until you have another 6 V patterns.

Step 9

Check the length fits you, tie a knot with the Centre cord ends. Using a Thread Zapper burn the ends off the long cords and to melt and stick it down