How to make beaded earrings - jewellery making tutorial for beginners

Place the CrystaLove and Candy beads alternately on two eyepins, separating them with silver rounds.

Cut off the excess wire and fold loops. It is important that the loops on one eyepin are turned towards each other perpendicularly as in the photo.

Put 3 dagger beads and 4 silver rounds alternately on the next eyepin. 

Now use the pliers to bend the wire into a "V" just behind the silver round. 

Put another 4 dagger beads and 4 silver rounds alternately on the eyepin. Cut off the excess wire, leaving enough to make a nice eye. I recommend doing two such parts at once. It is easier then to check if our bead "V" is the same for both earrings.

We connect all the elements of the first earring. First, we put a jump ring on the earwire and add our two simple eyepins with beads to the jump ring. Then we put the prepared "V" on the ends and it's ready!

For the second pair of earrings;
We prepare 3 lengths of chain for one earring.
2 short, 2 longer and one longest.

We put the chains alternating with beads on the eyepin. We put the chains between the beads. The longest chain will be at the centre. Cut the excess wire so that there is enough to make a mesh. We bend the hook into a light arch.

Cut two chains of equal length. I cut it to 15 links.

We put the chains on the loops of our eyepin with beads. We thread one Candy bead on a separate eyepin, cut it and put one eyelet on the earwire, bend the other and put on them the ends of two chains from the base.

Put one Candy bead on 5 ball pins, cut them, make loops and mount one bead to each dangling chain.

Both pairs of earrings are so cool that you can go crazy with combinations of beads, use different shapes, colours and sizes. You will achieve a different end result each time. I am curious about your ideas. Be sure to share them on our Facebook page - we would love to see your work :).