Hope Bracelet | Beads Direct


Products used in this project

Items (2)
Total Cost

Not all products are available for this project

Information about this project

Difficulty: Intermediate


This design is from our inspirations archive. As this design was created some time ago we sadly no longer stock all the products to create our design, but can still be useful for inspiration.

Step 1

Cut approx. 30cm of the wire.


Step 2

Thread on 1 crimp bead, 1 lapis bead, 1 charm carrier, 1 lapis bead, and then another crimp bead.


Step 3

Thread the wire through the jump ring on the clasp, and then back through the crimp, lapis,  carrier, lapis and crimp. Squish the crimps into place.


Step 4

Thread on 4 lapis beads,  the cross, and then 4 more lapis beads.


Step 5

 Thread on 1 crimp, 1 lapis, 1 carrier, 1 lapis and 1 crimp.


Step 6

Loop the wire through the other part of the clasp, and then back through the crimp, lapis,      carrier, lapis and crimp.


Step 7

Squish the crimps into place and trim any excess wire using wire cutters.

Step 8

Using the jump rings and chain extension attach the chain to the charm carriers.