Golden Goddess Headband |

Golden Goddess Headband

Products used in project:

Golden Goddess Headband

Items (3)
X Champagne Copper Beading Wire 0.32mm 28gauge 50g/70metres
Out of stock
Gold Colour Tiara Base 0.5x15cm Pk1
Out of stock
5328 Swarovski Crystal Bicones Xillion 4mm Crystal Dorado (Full Coating) Pk24
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Golden Goddess Headband

Designed by: Laura

Difficulty: Intermediate


Learn how to make the Golden Goddess Hairband using SWAROVSKI ELEMENTS crystals and pearls.

Step 1

Cut two pieces of wire, using wire cutters, which are both 50cm in length.

Step 2

Use one piece of wire and wrap it around the centre of the band a couple of times to secure it to the headband, making sure the start of the wire is not on the underside of the headband.

Step 3

Add your first bead and the warp the wire around the band. Add in your next bead and continue, alternating the bead pattern until you have used half your beads.

Step 4

Wrap the end of the wire a couple of times to secure it and trim any excess wire.

Keep the tension of the wire tight throughout and try to place the beads close together; this will give you a neat and tidy look.

Step 5

Take your second piece of wire and starting from the first bead in the centre secure the wire to the headband.

Step 6

Add in the beads, keeping the pattern the same as the other side. Again once you have added the rest of the beads, wrap the wire around the headband a couple of times to secure it and then trim any excess wire.