Look at the jewellery you can create with this kit. | beadsdirect.co.uk
0

Gold Snowflake Kit

Products used in project:

Gold Snowflake Kit

Items (1)
Qty
Price
X- Preciosa Czech Glass Bead Mix Blue Pearl 50g
BG881
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Gold Snowflake Kit

Difficulty: Intermediate

Rating:

Create all of these jewellery designs with this kit and a few other components. There will be plenty of  findings and snowflake spacer beads left over to create a whole lot more.

Step 1

Earrings 1 : Take a piece of wire approx. 5cm long and attach to an earwire using a crimp bead. Thread on a small metal bead, 3 gold snowflake spacer beads, a large metal bead, a small metal bead and a crimp bead. Crimp to secure and cut off any excess wire. Repeat to create the second earring.

Step 2

Earrings 2: Take a piece of wire approx. 5cm long and attach to an earwire using a crimp bead. Thread on a small metal bead, a silver snowflake spacer, a gold snowflake spacer and another silver snowflake spacer, a pearl bead, a small metal bead and a crimp bead. Crimp to secure and cut off any excess wire. Repeat to create the second earring.

Step 3

Bracelet 1: Thread the following on to an eyepin and loop at either end using round nosed pliers or a 1 step looper tool:

3 x groups of: 1 small metal bead, 1 blue snowflake bead, 1 white snowflake bead, 1 gold snowflake bead, 1 pearl bead, 1 gold snowflake bead, 1 white snowflake bead, 1 blue snowflake bead, 1 small metal bead.

4 groups of: 1 blue snowflake bead, 1 white snowflake bead, 1 gold snowflake bead, 1 pearl bead, 1 gold snowflake bead, 1 white snowflake bead, 1 blue snowflake bead.

Link these groups together using the loops. Attach a lobster clasp using jump rings to finish.

Step 4

Bracelet 2: Cut a piece of wire approx. 30cm and attach a necklace end using crimp beads. Thread on a small metal bead followed by alternate groups of 3 red and gold snowflake spacer beads. Once you have used 24 of the red snowflake spacer beads add another group of 3 gold, one red and 3 gold. Now add the shamballa fashion bead in the centre. Reverse the pattern to complete the other side, finishing with a necklace end. Leave a little extra space before you finish so the beads can move around or your bracelet won't drape properly. Use jump rings to attach a lobster clasp to finish.

Step 5

Bracelet 3: Cut a piece of wire approx. 30cm and attach a necklace end using crimp beads. Thread on 5 snowflake spacer beads alternating silver and gold, followed by a pearl bead. Continue in this way until you have added 5 pearl beads. Add another group of snowflake spacer beads and thread on a slightly larger pearl in the centre. Complete the other side in the same way, finishing with a necklace end. Leave a little extra space before you finish so the beads can move around or your bracelet won't drape properly. Use jump rings to attach a lobster clasp to finish.