Cut two pieces of cord approx. 40cm long. Double one piece and thread it through the hole in one end of the bangle. Repeat with the other piece on the other side.
Thread the 4 ends from one side of the bangle through the hole in the side of the slider bead, and through to the bottom hole. Repeat this on the other side.
Knot underneath the slider leaving enough room to take the bangle on and off. Cut off any excess cord.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this