Become a VIBGOLD Member today and receive FREE UK DELIVERY and 30% off your next order 

30% Off Glass Beads, Ends Midnight Friday  

Beads Direct - Beads for jewellery making, beads for craft and beadwork, semi-precious gemstones, glass beads, Swarovski Crystallized Elements, seed beads, silver beads, jewellery findings and more 0

Basket Summary

0

Gatsby Powder Rose Necklace

Gatsby Powder Rose Necklace

Gatsby Powder Rose Necklace

Products used in the project

Item QTY Price

5810 Swarovski Glass Pearls 3mm Powder Rose Pk100

HH86

2 £4.97

5810 Swarovski Crystal Pearl 4mm Powder Rose Pk50

HH16

2 £2.76

5810 Swarovski Glass Pearls 6mm Powder Rose Pk50

HH44

2 Out of stock

5810 Swarovski Glass Pearls 8mm Powder Rose Pk25

HH70

4 £3.31

Toho Size 11 Round Seed Beads Transparent Crys...

11TR161.

1 £1.19

Beadalon Gold Plated Crimp Beads 1.3mm #0 Pk100

F493

1 £1.31

Gold Plated Chain Extension 3x53mm with Teardrop Pk10

F1089

1 Out of stock

KO Beading Thread Grey 50m

TC306 - Alternative Product

1 £2.72

Beadalon Size 12 Beading Needles with Threader...

NB203

1 £4.16

Beadalon 7 Strand Flexible Beading Wire 'Brigh...

W78

1 £3.34

Gold Plated Iron Jumprings 4mm 0.8mm Thick Pk100

F0214

1 £1.31

Gold Plated Small Heart Lobster Clasp 11mm Pk1

F0351

1 £3.29

Some of the products required to make this item are either out of stock or no longer available.

Some of the products required to make this item are out of stock and have been replaced with suitable alternatives. The alternative items will be added to your basket if you select "add all products to basket".

Total Cost = £46.02
Add all products to basket

Step 1

To make the tassel

Take a 7mm jump ring and approx. 1m of KO thread. Thread the KO on to the needle and tie it on to the jump ring at the opposite end to the opening. 

Step 2

Thread 10x3mm pearls, 4x4mm pearls and 5x6mm pearls on to the thread. Add a seed bead at the end and then thread the needle back up through all the pearl beads. Make sure the beads are pulled tight then stitch the thread back around the jump ring.

Step 3

Repeat step 2 until you have created 12 dangles. If you need more thread, fasten off the piece you are working with then tie another piece on to the jump ring.

Step 4

Hook the jump ring on to an eye pin and thread it through the bead cap. Create a loop on the other side at the top of the bead cap.

Step 5

Thread 1x4mm pearl, 1x8mm pearl and 1x4mm pearl on to a 5cm piece of wire. Crimp one end to a Trinity Brass connector. Now connect another Trinity Brass connector to the other end. Repeat this process on the other side of the necklace.

Step 6

Cut another piece of wire approx. 60cm long. Use a crimp to attach to one of the Trinity Brass connectors. Thread on 1x4mm pearl and then add 35x8mm pearls and use a crimp to attach a lobster clasp.

Step 7

Repeat step 8 on the other side of the necklace, finishing with a lobster clasp.

Step 8

To create the necklace

Cut a piece of wire approx. 25cm long. Thread through the loop at the top of the tassel you have just made until the tassel sits in the middle of the wire. Thread 1x4mm pearl, 1x8mm pearl, 2x4mm pearl and 1x8mm pearl over both ends of the wire. 

Step 9

To create the necklace

Cut a piece of wire approx. 25cm long. Thread through the loop at the top of the tassel you have just made until the tassel sits in the middle of the wire. Thread 1x4mm pearl, 1x8mm pearl, 2x4mm pearl and 1x8mm pearl over both ends of the wire.

Step 10

Separate the ends of wire and thread 1x4mm pearl, 5x6mm pearls and 1x4mm pearl on to each strand. Add a crimp bead to each wire and use to attach the Trinity Brass connectors.

Step 11

Thread 1x4mm pearl, 1x8mm pearl and 1x4mm pearl on to a 5cm piece of wire. Crimp one end to a Trinity Brass connector. Now connect another Trinity Brass connector to the other end. Repeat this process on the other side of the necklace.

Step 12

Cut another piece of wire approx. 60cm long. Use a crimp to attach to one of the Trinity Brass connectors. Thread on 1x4mm pearl and then add 35x8mm pearls and use a crimp to attach a lobster clasp.

Step 13

Repeat step 8 on the other side of the necklace, finishing with a lobster clasp.

Get Your Materials!

Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home. 

Get the items you need to make this