Learn how to create this Gatsby inspired cuff bracelet | beadsdirect.co.uk

Gatsby Cuff Bracelet

Products used in project:

Gatsby Cuff Bracelet

Items (5)
77508 Swarovski Silver Plated Rondelle 8mm Crystal Clear Pk6
Out of stock
Glue Beadalon G-S Hypo Cement 1/3oz
Out of stock
Stretch Magic Elastic Bead Cord 0.5mm Clear 10m
Out of stock
Silver Plated Iron Eyepins 26mm (1 inch) Pk100
Out of stock
Titanium Plated Adjustable Ring Base Holds 8mm(SS39) Rivoli Pk1
Out of stock
Total Cost

Not all products are available for this project

Information about project:

Gatsby Cuff Bracelet

Difficulty: Expert


Get the gatsby look and make this Gatsby inspired cuff bracelet.

Step 1

This bracelet has been designed to fit wrist sizes of 15-17cm. You will need to use approx.1metre of elastic. (Don’t worry if you have plenty left over as we have overestimated the length).

You will need to start your bracelet by threading on a rondelle spacer bead first. Then follow the pattern below.

Pearl Instructions

Step 2

When you have completed this pattern you need to tie a double knot in the rondelle bead and take the two pieces and thread it through another rondelle in the opposite direction.

Pearl Bracelet Instructions

Step 3

 Follow the pattern as you did in step 1. When you come to thread on a rondelle you will need to thread through the rondelle, go around the rondelle, through the rondelle below and back through the original rondelle. It should look like the diagram below.

Pearl Bracelet Instructions 

Continue to follow the pattern and replicate the process in step 3 for whenever you thread on a rondelle

Step 4

When you have completed the 2 rows you will need to create 3 more rows of pearls and rondelles. Remember to double the elastic before starting a new row. For extra security add a dap of glue

Step 5

Clip on your carriers as shown below

Pearl Bracelet Instructions

Step 6

You have completed the cuff. You are now ready to start making the hand jewellery connector

Step 7

To make the hand connector:
Thread a pearl on to an eyepin and attach to a jumpring. Attach that jumpring to a Swarovski Rivoli connector. On the other end of the Swarovski connector attach another jumpring along with another pearl on an eyepin.

Step 8

Repeat step 1. You will now have 2 pieces. Connect these 2 pieces together by adding a jumpring to the 2 eyepins.

Step 9

The 2 non-connected pieces now can be added to the clip on connectors (from the bracelet), You will now see your hand connector taking form.

Step 10

Attach another jumpring to the end, then connect 2 of the SWAROVSKI ELEMENTS silver plated filigrees.

Step 11

Connect these 2 filgrees to the flower charm using 2 jumprings

Step 12

Connect this follower charm to the ring base using a slightly larger jumpring.

Step 13

Finally glue in all the SWAROVSKI ELEMENTS crystals into their settings.