Cut 3 pieces of wire measuring approx.20cm
Thread 1 piece of wire through the toggle clasp. Make a small loop and thread on a crimp bead so it covers all the wire, crimp the loop into place. Repeat this for the other two wires. The toggle clasp should now be securely attached to all 3 wires.
Thread on the 6mm Pink Swarovski Neon Pearls to 1 of the strands. After every 6th bead add a spacer. (The spacer has 5 holes- you will only be using the holes at the ends and in the centre).
You will use a total of 3 spacers. When you have threaded on a total 24 beads, thread on a crimp bead and then thread it through the other toggle and crimp into place.
Repeat Step 3 another 2 times but use the 6mm Orange and Yellow Neon Pearls instead
Repeat Step 3 another 2 times but use the 6mm Orange and Yellow Neon Pearls instead.
Attach this Flower anywhere you wish on to your bracelet. Continue making these flowers and attach to bracelet
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this