Create this 'Fabulous Frontier' Bracelet | beadsdirect.co.uk
0

Fabulous Frontier

Products used in project:

Fabulous Frontier

Items (5)
Qty
Price
5714 Swarovski Star Bead 8mm Crystal AB Pk6
AC637
1
Out of stock
Silver Plated Earwires with Coil Pk20 (10 Pairs)
F1002
1
Out of stock
X-Silver Plated Iron Jumprings 7mm 0.8mm Thick Pk100
F0213
1
Out of stock
Antique Silver Zamak Wave Toggle Clasp 18x23mm Pk1
F0105
1
Out of stock
X Silver Plated Copper Wire 0.60mm 10metre Coil
W366
1
Out of stock
Total Cost
£0.00

Not all products are available for this project

Information about project:

Fabulous Frontier

Difficulty: Intermediate

Rating:

Create this 'Fabulous Frontier' Bracelet using Swarovski Crystals.

Step 1

Drill a hole in each side of the cabochon.

Step 2

Thread a Swarovski bicone onto the 0.6mm wire, make a large loop in the wire with round nose pliers and attach to the cabachon.

Step 3

Wrap the tail end of the wire around the wire stem 3 times and trim the end, push the Swarovski bead up to the wrapped end. Create another large loop in the other end of the wire link and cut the wire with an approx 5cm tail.

Step 4

Create the next link by repeating step 3 but using a swarovski star instead of a bicone. Attach this to the previous link, then wrap the 5cm tail wire from the previous link around 3 times again to finish it.

Step 5

Continue this untill you have 5 links on both sides of the cabachon. Attach a jumpring to the end of one side of links and a clasp to the other side of links.