Turquoise Fringe Earrings | beadsdirect.co.uk

Fabulous Fringe Earrings

Information about project:

Fabulous Fringe Earrings

Designed by: Kara-May

Difficulty: Beginner


Learn how to make these fab seed beaded boho earrings using eye pins and chain. Our colour choices are for your inspiration but you are of course, free to mix it up and use any bead colour you want. Ready? let's Get Creative!

You can add all the items you need to your basket by clicking the box in the 'Products used' section above, or you can choose your own materials from the links below. Please note that the colours & products illustrated in the image above may not match the 'Products List'. 

Remember - our tutorials are for inspiration and learning purposes. They include links to the relevant categories for you to choose your own colour combinations and we positively encourage you to experiment with different shapes, sizes, finishes, composition and texture. Why not choose your own beads and colours to achieve something in your own style? Let your imagination run wild and make your dream piece of jewellery.

Designed by Kara-May - January 2019

Step 1

You will find these video's useful if you are new to beading:

How to use a Jump Ring

How to Turn a Loop

Step 2

Firstly cut your chain, you will need two pieces that are equal lengths approximately 4 cm in length each. Attach a jump ring to each piece of chain at the top and attach your earwire to the jump ring and then close that jump ring. You should have two lengths of chain hanging from the earwire.

Step 1

Step 3

Now straighten your headpins. You will need 7 for each earring..

Step 1

Step 4

Add seed beads to the headpins in the following quantities:

  • Red x 9
  • Yellow x 12
  • Pink x 15
  • Green x 18
  • Orange x 15
  • Purple x 12
  • Blue x 9

Trim pin where necessary to leave a 1cm tail and turn a loop.

Step 1

Step 5

Add the pins just created to an eyepin. separating each with a corresponding colour seed bead.

Turn a loop at the open end of the eyepin.

Step 1

Step 6

Attach your chain ends to the eyepin bar carrying the fringe just created.

Repeat all steps for the second earring.

Step 1