Eternal Flame Necklace | beadsdirect.co.uk
0

Eternal Flame Necklace

Products used in project:

Eternal Flame Necklace

Items (5)
Qty
Price
Rhodium Plated Steel Chain 2x3mm 1metre
CH237
1
Out of stock
X-Silver Plated Iron Jumprings 7mm 0.8mm Thick Pk100
F0213
1
Out of stock
X Nunn Design Silver Plated Hoop Charm/Connector 24mm Pk1
CR0247
1
Out of stock
Total Cost
£6.58

Not all products are available for this project

Information about project:

Eternal Flame Necklace

Designed by: Laura

Difficulty: Beginner

Rating:

Make yourself a simple but striking necklace with a difference with our new filigree drop pendant.

Step 1

Cut 2 x 19cm lengths of chain and attach both ends of both pieces to a jumpring. Attach one of those ends to a lobster clasp.

Step 2

Cut 2 x 7cm of chain and attach them to either side of the chain. On each end, add a jumpring and link them both through the loop of the pendant.

Step 3

Cut 2 x 4cm lengths of chain and connect them to the jumprings on either side of the necklace. Add a jumpring to each end of the chains and connect this to the silver hoop. Pass the pendant through the hoop to combine the two layers.