Donatello Renaissance Bracelet
Thank you for viewing our archived gallery design. This design is in the gallery archive because we no longer stock some of the main items used to make this design and we don’t currently have suitable alternatives. However we didn’t want to remove the design completely as we thought it might inspire you. If you’d like to buy all the items needed to create a project please visit our main design gallery and browse our current designs.
Attach your charm to the charm carrier with a jumpring.
Cut 2 pieces of nappa leather- Make sure that the length of this nappa leather will fit comfortably around you wrist. At this stage it is better to overestimate the length as you can trim it at a later stage.
Thread the two pieces of Nappa Leather through the buckle slider. Slide on your charm carrier, then thread the nappa leather back through the buckle slider. The carrier should act as a stopper to prevent the nappa leather from coming away from the slider.
Once you are happy with the size of the bracelet glue the magnetic clasps onto the ends of the nappa leather.
Hint: When applying glue to your clasp ensure that the magnets are separated otherwise the glue may seep through and glue the clasp shut.
When gluing the magnetic clasps you will also need to ensure that the both clasps are not repelling. Both clasps need to sit side by side. Leave to dry for a few moments.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this