Crystal Orbit Bracelet
Take your leather and fold in half. Cut it so that the doubled length fits around half of your wrist. (You can slot the cut ends of leather into the bracelet bar back to test the length.)
When you are happy with the length of the leather, glue in the cut ends to the back side of the bracelet bar. They should be flat on top of each other.
Once the glue has dried, pinch together the leather at the free end and slide on the chaton setting slider. Use a small drop of FeviKwik to secure your SWAROVSKI crystal onto it.
Hook the loop of the leather onto the bracelet bar (the sparkly setting). From there, pull the chaton setting as close to the sparkly part of the bracelet bar as you can.
Make sure you get the materials you need to create this design yourself! Click the button below to add everything you need to your basket in one go. You can edit the list too just in case you want to make more than one, or you already have some supplies at home.Get the items you need to make this